Enable Parallel Broadband
Begin by verifying that every access point in the network is properly configured to connect to its individual broadband Internet account.
Secondly ensure that either:
• each access point is connected to an Ethernet port in the network
OR
• the access points are wired to each other.
Then all the access points has to have the DHCP server, followed by the Parallel Broadband feature, enabled through the
Step 1:
Select Parallel Broadband from the CONFIGURATION command menu.
Step 2:
Select Enable and click the Apply button.
Step 3:
Repeat Step 1 and Step 2 for the rest of the access points.
New users will then be assigned to the access point with the smallest load, ensuring that each access point has approximately the same number of users.
Important:
Implementing Parallel Broadband is redundant if there is only 1 access point.
Page 95
