Step 3:
Next, connect the RJ45 Ethernet cable attached to PoE to your PC’s Ethernet network adapter.
Once you have finished configuring your access point, you can connect the PoE RJ45 Ethernet cable to your network device, such as to a switch or hub.
Step 4:
Connect the power adapter supplied with PoE to the main electrical supply and the power plug into the socket of PoE.
Note:
The voltage and current supplied to the access point’s power adapter and PoE power adapter are different. Do not interchange the power adapters.
Step 5:
Now, turn on your power supply. Notice that the LEDs have lighted up. This indicates that the access point is receiving power through PoE and that connection between the access point and your PC has been established.
Page 17
