Compex Systems WPE53G manual Setup Your WAN

Setup Your WAN

(Available in Wireless Routing Client and Gateway modes)

NOTE:

Any changes to the WAN Setup will only take effect after rebooting.

Setup your WAN to share Internet connection among the clients of the access point.

Setup your WAN for cable internet whereby WAN IP address is

dynamically assigned by ISP

The access point is pre-configured to support this WAN type. However, you may verify the WAN settings with the following steps:

Step 1:

Under CONFIGURATION on the command menu, select WAN Setup.

Step 2:

On the WAN Dynamic Setup screen, verify that the WAN Type is Dynamic (DHCP). Otherwise, click on the Change button.

Step 3:

Select Dynamic IP Address and hit the Apply button.

Reboot to let the settings take effect.

Page 57