Extron electronic DVS 510 SA manual Video output, Sync, Audio input

Video output

Number/signal type	2 scaled RGBHV, RGBS, RGsB; Y, R-Y, B-Y
	1 scaled DVI/HDMI (HDCP compliant)
Connectors	2 female 15-pin HD
	1 female DVI-I (only digital signal active)
Nominal level	1 Vp-p for Y of component video and for G of RGsB
	0.7 Vp-p for RGB and for R-Y and B-Y of component video
Minimum/maximum levels	0 V to 0.7 Vp-p
Impedance	75 ohms
Vertical frequency	50 Hz, 60 Hz, or 75 Hz, depending on selected output resolution
Scaled resolutions	640x4801,2,3, 800x6001,2,3, 852x4801,2,3, 1024x7681,2,3, 1024x8521,2,3,
	1024x10241,2,3, 1280x7681,2, 1280x8001,2, 1280x10241,2,3, 1360x7651,2,3,
	1360x7681,2,3, 1365x7681,2,3, 1366x7681,2,3, 1365x10241,2,3, 1400x10501,2,
	1440x9001,2,3, 1600x12001,2, 1680x10501,2, 1920x12001,2, 2048x10801,2,4,5,6,7,8,9,
	480p2,9, 576p1, 720p1,2,6,7,8,9, 1080i1,2,9, 1080p1,2,4,5,6,7,8,9

1= at 50 Hz, 2 = at 60 Hz, 3 = at 75 Hz, 4 = at 23.98 Hz, 5 = at 24 Hz, 6 = at 25 Hz,

7= at 29.97 Hz, 8 = at 30 Hz, 9 = at 59.94 Hz

Return loss	-21 dB @ 5 MHz
DC offset	±300 mV maximum with input at 0 offset

Sync

Input type	RGBHV, RGBS, RGsB, bi-level or tri-level component video
Output type	RGBHV, RGBS, RGsB; Y, R-Y, B-Y (bi-level or tri-level)
Input standards	NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level	2.75 Vp-p to 5.0 Vp-p for RGBHV or RGBS
	0.6	Vp-p for component video tri-level sync
	0.3	Vp-p for component video bi-level sync or RGsB
Output level	TTL: 5.0 Vp-p, unterminated
	0.6	Vp-p for component video tri-level sync
	0.3	Vp-p for component video bi-level sync or RGsB
Input impedance	75 ohms for horizontal; 510 ohms for vertical
Output impedance	75 ohms
Polarity	Positive or negative (selectable)

Audio

Gain	Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response	Fixed and variable: 20 Hz to 20 kHz, ±1.5 dB
THD + Noise	Variable: <0.11% at 1 kHz, 20 kHz bandwidth
	Fixed: <0.025% at 1 kHz, 20 kHz bandwidth
S/N	Variable: 90 dB at rated maximum output
	Fixed: 90 dB at rated maximum output
Crosstalk	-80 dB at 1 kHz, fully loaded
Stereo channel separation	84 dB at 1 kHz
Bass	±12 dB at 100 Hz
Treble	±12 dB at 10 kHz

Audio input

Number/signal type	10 stereo, balanced or unbalanced
Connectors	(10) 3.5 mm 5-pole captive screw connectors (stacked)
Impedance	>10k ohms balanced/unbalanced, DC coupled
Nominal level	+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level	+10.4 dBu, (balanced or unbalanced) at 1% THD+N
Input gain adjustment	-12 dBu to +12 dBu, adjustable to input

NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

DVS 510 Series • Reference Information 108