Extron electronic DVS 510 SA manual # * X3* Oscn Oscn X#, # Oscn Oscn X#

Command	ASCII Command	Response	Additional Description
	(Host to Scaler)	(Scaler to Host)
Advanced Configuration (continued)
Front Panel Security Lockout (Executive Mode)
Set mode 1	1 X	Exe 1 ]	Lock all front panel functions.
Set mode 2	2 X	Exe 2 ]	Allow limited adjustments to be made
			from the front panel (input switching, PIP,
			volume control, and Auto-Image).
Disable	0 X	Exe 0 ]	Allow all front panel adjustments.
View status	X	X5( ]	Show current lock mode status.
Input Aspect Ratio
Set to Fill	E 1 ASPR }	Aspr 1 ]	Set the input to always fill the entire
			output raster (default).
Set to Follow	E 2 ASPR }	Aspr 1 ]	Display the input with its native aspect
			ratio.
View aspect ratio	E ASPR }	Aspr X3( ]	View the current aspect ratio setting.
Overscan Mode

NOTE: Overscan mode applies only to SMPTE input rates (NTSC, PAL, 480p, 576p, 720p, 1080i, and 1080p).

Set value	E X# * X3* OSCN }	Oscn X# * X3* ]	Set input signal type X# to overscan
			mode X3*.
View status	E X# OSCN }	Oscn X# * X3* ]	Show overscan status for input type X#.
HDCP Notification
Enable HDCP	E N 1 HDCP }	Hdcp N 1 ]	Enable HDCP notification (default). A
notification			full-screen green signal and an on-screen
			message are displayed when an HDCP
			compliant source is switched to a
			non-compliant display.
Disable notification	E N 0 HDCP }	Hdcp N 0 ]	Disable HDCP notification; mute output
			instead.
View notification status	E N HDCP }	X1) ]	View HDCP notification status

NOTE: X# = Input signal type	1	= RGB, 2 = YUVp/HDTV, 3 = RGBcvS, 4 = YUVi, 5 = S-video,
X1) = HDCP notification status	6	= Composite, 7 = DVI
	0	= disabled, 1 = enabled
X3* = Overscan setting	0	= 0.0% (default for RGB and DVI). A true Auto-Image is executed on
	1	SMPTE inputs.
		= 2.5% (default for YUVp/HDTV). An Auto-Image command snaps to
	2	a 2.5% table.
		= 5.0% (default for composite, S-video, YUVi, and RGBcvS). An
X3( = Aspect ratio	1	Auto-Image command snaps to a 5.0% table.
		= Fill: each input rate fills the entire output raster (default).
X5( = Front panel lock (executive mode)	2	= Follow: each input rate is displayed with its native aspect ratio.
	0	= executive mode disabled, 1 = full front panel lockout,
	2 = Partial front panel lockout (Only input selection, PIP, volume control,
		and Auto-Image are available.)

DVS 510 Series • Remote Configuration and Control 64