Extron electronic DVS 510 SA manual DVS 510 Series Operation

CPicture control buttons — Press these buttons to adjust window and image size, position, brightness, range of dark and light values (contrast), color, tint, detail, zoom

(magnify or reduce), and pan. When one of these buttons is pressed, it lights amber.

NOTE: When PIP mode is enabled, all picture control adjustments affect only the PIP

window.

(See “Picture Controls” on page 36 for details on these button functions.)

DLCD screen — Displays messages, menu information, and your selections from menus or control buttons (see “Menus on the LCD Screen” on page 20 for more information).

EMenu navigation buttons — Press Menu to access the DVS menu system and step through the menus. From each menu, press Next to step through the submenus (see “Menus on the LCD Screen” for details).

FAdjust knobs — Rotate these horizontal ([) and vertical ({) knobs to scroll through submenu and picture control options and make adjustments.

GVolume knob and indicator LEDs — Turn this knob to adjust the volume on the input that is currently selected. The three LEDs, labeled Min, Mid, and Max, light incrementally in bottom to top order to indicate the current volume level. The Max LED (top) is red; the others are green (see “Volume Control” on page 39 for details on these controls).

HConfig port — This configuration port on a 2.5 mm TRS connector is an alternative to the RS232 port on the DVS rear panel. (For a description of the rear panel RS232 port, see “Rear Panel” on page 7).

NOTE: This port supports RS-232 communication only. Only the rear panel RS232 port supports both RS-232 and RS-422.

Both of the DVS serial ports can be used for system configuration and control. Instructions are received through these ports from the computer via SIS commands or the Signal Processing Products Control Program. Both serial ports can be active at the same time.

The default protocol for this configuration port is:

•	9600 baud	•	8 data bits	• 1 stop bit
•	No parity	•	No flow control

An optional 2.5 mm TRS configuration cable (part number 70-335-01) is available from Extron and can be used to connect your computer to this port. (See “Connecting to the RS-232 Config Port (Front Panel)” on page 11 for the configuration and pin assignments for this cable.)

IInfrared sensor — This sensor receives infrared (IR) signals from the IR 904 remote control (see “Using the Optional IR 904 Remote Control” on page 43 for details).

DVS 510 Series • Operation 16