Extron electronic DVS 510 SA manual Adjusting the Picture Controls, Picture Controls Summary

Adjusting the Picture Controls

To adjust the picture controls for the currently selected input:

1.Press the button for the input that you want to adjust. If you want to adjust the PIP window, press the PIP On/Off button to enter PIP mode, then press the button for the PIP input.

2.Press the desired picture control button: Size, Bright/Cont (brightness and contrast), Detail (sharpness), Position (centering), Color/Tint (color quality), or Zoom/Pan

(magnification or horizontal and vertical panning).

3.Rotate the horizontal ([) and vertical ({) Adjust knobs to select a level from the available range.

4.Repeat steps 1 through 3 for each image adjustment you want to make for the selected input.

NOTE: The LCD screen displays N/A in place of a value if that adjustment does not apply to the video format of the input.

Picture Controls Summary

The following table explains the functions of the Picture Controls buttons and how to make adjustments. (In the Display column, n is a single digit, 0 through 9.)

Button	Display			Function	Range	Adjust Knob
Size	H	Size	V	Enlarge or shrink the	Min: 0	H (width):
	nnnn		nnnn	image.	Max: 4095	Horizontal ([)
						V (height): Vertical ({)
Bright/Cont	Brit		Cont	Brightness: Set the	Brightness: 000-127	Brightness:
	nnn		nnn	black level of the input.	Default: 064	Horizontal ([)
				Contrast: Increase	Contrast: 000-127	Contrast: Vertical ({)
				or decrease range of	Default: 064
				image light and dark
				values.
Detail		Detail		Adjust image	000-127	Either
		nnn		sharpness and noise	Default: 064
				reduction.
Position	H	Center	V	Position image relative	Range: -2048 – +2048	H: Horizontal ([)
	±nnnn		±nnnn	to display center.	Default: 0000	V: Vertical ({)
Color/Tint	Color		Tint	Color: Adjust color	Color: 000-127	Color: Horizontal ([)
	nnn		nnn	intensity. (At lowest	Default: 064	Tint: Vertical ({)
				adjustment, all colors
					Tint: 000-127
				are shades of gray.)
					Default: 064
				Tint: Change
				appearance of colors.
Zoom/Pan		Zoom:		Increase or decrease	Min: 100%	Either
Press this		nnn%		the size of the image	Max: 200%
button once				while keeping the
					Default: 100%
to set Zoom;				aspect ratio constant.
twice to set	H	Pan:	V	Move the focus on the	For H and V:	H: Horizontal ([)
Pan.
	±nnn		±nnn	image right, left, up, or	-100 through +100	V: Vertical ({)
				down.	Default: 000

DVS 510 Series • Operation 37