Extron electronic DVS 510 SA manual Date/Time Settings section, Date/Time Settings Fields

Date/Time Settings section

The fields in the Date/Time Settings section enable you to view and set the date and time parameters.

Figure 42. Date/Time Settings Fields

To change the date and time settings:

1.In each Date or Time field that you want to change, select the desired value from the drop-down menu or key it in the field. (The Month drop-down box is selected in the figure above); or

Click the Local Date/Time button to set the date and time to your local settings.

2.From the Zone menu, select your time zone. The selection displayed in the Zone field identifies the standard time zone and the amount of time, in hours and minutes, that local time varies from the Greenwich Mean Time (GMT) international time reference.

3.If daylight saving time is currently in effect in your area, select the radio button for the area. If daylight saving time is not in effect or is not observed, select Off.

NOTE: When daylight savings time is enabled, the scaler updates its internal clock

between standard time and daylight savings time in the spring and fall on

the date that the time change occurs in the United States of America and parts of Europe and Brazil. When daylight savings time is turned off, the

scaler does not adjust its time reference.

4.Click the Submit button at the bottom of the Date/Time Settings section to implement your selections.

DVS 510 Series • HTML Configuration and Control 90