Extron electronic DVS 510 SA manual Internal Temp. screen, Reset to Factory screen

Color Bars Crop

Crosshatch 1.33 Aspect

4x4 Crosshatch

1.78 Aspect

Grayscale

Ramp

Alt Pixels

White Field

Figure 19. DVS 510 Series Test Patterns

To select a test pattern:

1.85Aspect

2.35Aspect

Blue Mode

1.From the Advanced Configuration menu, press Next until the Test Pattern submenu is displayed.

2.Rotate either Adjust knob to select a test pattern. The default is Off (no test pattern).

Internal Temp. screen

The Internal Temp. screen shows the current internal temperature of the DVS unit in degrees Fahrenheit and Celsius. This is an information-only screen; no adjustments can be made from it.

Reset to Factory screen

This screen lets you reset the DVS to the default settings with which it was delivered from the factory. To reset the unit:

1.From the Advanced Configuration menu, press Next until the Reset to Factory Press Detail screen is displayed. The Detail button under Picture Controls begins to blink.

2.To initiate the reset, press Detail. When the reset is complete, the default cycle is displayed.

DVS 510 Series • Operation 33