Extron electronic DVS 510 SA Film Mode Detect 32 pulldown detection, Video Mute, Picture Controls

Command	ASCII Command	Response	Additional Description
	(Host to Scaler)	(Scaler to Host)
Active Lines
Specify a value	E X( ALIN }	Alin X! * X( ]	Adjust the active lines value to X(.
Increment value	E + ALIN }	Alin X! * X( ]	Increase the number of active lines.
Decrement value	E – ALIN }	Alin X! * X( ]	Decrease the number of active lines.
View active lines	E ALIN }	X( ]	Show the number of active lines.
Film Mode Detect (3:2 pulldown detection)
Enable	E X! * 1 FILM }	Film X! * X1) ]	Enable Film mode detection (auto sense
			for 3:2 or 2:2 pulldown) for input X!.
Disable	E X! * 0 FILM }	Film X! * X1) ]	Disables Film mode detect for input X!.
View setting	E X! FILM }	X1) ]	View the current film mode detect
			setting. For X1):
			0 = Film mode detection off.
			1 = film mode detection on.
Video Mute
Mute video to black	1B	Vmt1 ]	Mute the video and display a black
			screen.
Mute video and sync	2B	Vmt2 ]	Mute the video and sync on all outputs.
Unmute video and sync	0B	Vmt0 ]	Disable all mutes.
View mute status	B	X4@ ]	View mute status X4@.

Picture Controls

Color (available for NTSC composite and S-video only)

Specific value	E X1% COLR }	Colr X! * X1% ]	Set the color level to X1%.
Increment up	E + COLR }	Colr X! * X1% ]	Select the next higher color level.
Increment down	E – COLR }	Colr X! * X1% ]	Select the next lower color level.
View color setting	E COLR }	X1% ]	View the current color setting.
Tint (available for NTSC composite and S-video only)
Specific value	E X1% TINT }	Tint X! * X1% ]	Set the tint level to X1%.
Increment up	E + TINT }	Tint X! * X1%]	Select the next higher tint level.
Increment down	E – TINT }	Tint X! * X1% ]	Select the next lower tint level.
View tint setting	E TINT }	X1% ]	View the current tint setting.

NOTE: X!	= Input selection	1 through 10
X(	= Active lines	±256 of the default value
X1)	= On and off	0 = off, 1 = on
X1%	= Picture adjustments	0 through 127 (for color, tint, contrast, brightness, and detail filter)
X4@ = Video mute status		0 = unmuted, 1 = muted to black screen, 2 = all output video and sync
		muted

DVS 510 Series • Remote Configuration and Control 57