Extron electronic DVS 510 SA manual X10% =, X10& =

X10% =	Event buffer	0	= receive
		1	= unified
		2	= data
		3	= NVRAM
X10^ =	Event buffer offset	0 through maximum buffer size
X10& =	Event data size	b = bit
		B = byte (8 bits)
		S = short (16 bits)
		L = long (32 bits)
NOTE:	In a write operation, this parameter can optionally be preceded by A (for and) or O (for
	or) to logically combine with content instead of replacing it.

X10* = Event data to write

X10( = Reading password

X11) = Number of bytes to read

X11% = Default unit name

X11* = Security level of connection

X12) = ASCII digits representing numeric value of data element read from event buffer.

X12% = Broadcast repetition rate in seconds

X12& = Threshold settings for all ports

X12( = Number of seconds before IP

connection timeout

X13# = Hardware (MAC) address with the 4 most significant hex nibbles converted into a single 16-bit decimal number.

X13$ = Hardware (MAC) address with the 8 least significant hex nibbles converted into a single 32-bit decimal number.

If a password exists, the unit responds with the password (RS-232 connection) or 4 asterisks (****) (IP connection). If there is no password, the response is empty.

1 through 127

Combination of the model name and the last three pairs of the unit MAC address (for example, DVS-510-SA-05-62-3D)

0 = anonymous

01–10= extended security levels

11 = user

12 = administrator

Leading zeros are suppressed.

0 through 255 Default = 0 (clear)

(The response is returned with leading zeros.)

0 = none

1 = full

2 = standby and full

1 through 65000

Default = 30 = 300 seconds

Can be up to 10 digits.

DVS 510 Series • Remote Configuration and Control 69