Extron electronic DVS 510 SA manual X9#, X10 =, X10! =, X10# =, X10$ =

X8*	=	Time (in 10-ms increments) to wait
		between characters before
		terminating the connection
X8(	=	Hardware (MAC) address
X9)	=	Subnet mask

X9! = Message length, delimiter value, or byte count (via the serial port). (This parameter is optional.)

X9@ = Verbose mode

2 through 32767 Default = 2, or 20 ms

00-05-A6-xx-xx-xx

nnn.nnn.nnn.nnn

(Leading zeros in each of the four fields are optional for setting values and are suppressed in returned values.

Factory default subnet mask: 255.255.0.0

nL = Length of message to be received. For the length, n = byte count (1 through 32767; default is 0).

nD = Delimiter value

0 = clear or none (default for Telnet connection)

1 = verbose mode (default for RS-232 and RS-422)

2 = tagged responses for queries

3 = verbose mode and tagged responses for queries

NOTES: • If verbose mode is enabled (modes 1 and 3), you are shown all actions (commands) initiated by other users via the web, RS-232/RS-422, or the front panel. (This does not include information requests.)

• If tagged responses are enabled (modes 2 and 3), the unit responds to all read or view commands with the command text as well as the value or information requested For example, the View Name command E CN } returns Ipn • X8@ ] instead of the name only (X8@).

X9#	=	Priority status for receiving timeouts	1	= use Send data string parameters (if they
				exist) (default).
			2	= use Configure receive timeout command
				parameters instead.
X9%	=	Baud rate	9600 (default), 19200, 38400, or 115200
X9^	=	Parity	Odd, Even, None (default), Mark, Space (Only the
			first letter is required.)
X9&	=	Data bits	7 or 8 (default)
X9*	=	Stop bits	1	(default) or 2
X9(	=	Port type	0	= RS-232 (default)
			1	= RS-422
X10) =		Flow control	Hardware, Software, None (default) (Only the first
			letter is required.)
X10! =		Data pacing	Specified in milliseconds between bytes:
			0000 through 1000 (default = 0 ms)
X10@ =		Password	12 characters maximum

NOTE:	The following characters are invalid in passwords:
	{space} + ~ , @ = ` [ ] { } < > ‘ ’	“ ” ; : \ and	?.

X10# =	Daylight saving time	0	= off or ignore
		1	= USA (begins second Sunday in March and ends first
		2	Sunday in November.)
			= Europe (Begins last Sunday in March and ends
		3	last Sunday in October.)
			= Brazil (Begins third Sunday in October and ends
			third Sunday in February.)
X10$ =	Event number	0 through 99 (The event must be running.)

DVS 510 Series • Remote Configuration and Control 68