Extron electronic DVS 510 SA Accessing the Web Pages, Proxy server... check box, then click OK

HTML

Configuration and

Control

This section provides procedures for accessing and using the DVS 510 embedded web pages. The following topics are included:

•Accessing the Web Pages

•Special Characters

•System Status Page

•Configuration Pages

•File Management Page

•Control Pages

The DVS can be controlled and operated through its Ethernet port, connected via a LAN or WAN and using a web browser such as Microsoft® Internet Explorer®. The browser displays the DVS web pages, which provide an alternative means of configuring and operating the scaler. These factory-installed web pages are always available and cannot be erased or overwritten.

NOTE: If your Ethernet connection to the scaler is unstable, try turning off the proxy server in your web browser. To do this in Microsoft Internet Explorer, click

Tools > Internet Options > Connections > LAN Settings, clear the Use a

proxy server... check box, then click OK.

Accessing the Web Pages

Access the HTML pages as follows:

1.Start the web browser program.

2.Click in the browser Address field and enter the IP address of your DVS.

NOTE: If the local system administrators have not changed the value, use the factory-specified default 192.168.254.254 in this field.

3.If you want the browser to display a page other than the default page (such as a custom page that you have uploaded), enter a slash (/) following the IP address and the name of the page file to open.

NOTES: • The browser Address field should display the IP address in the following

format: nnn.nnn.nnn.nnn/optional_file_name.html.

• The following characters are invalid or not recommended in file names: + ~ , @ = ` [ ] { } < > ‘ ’ “ ” ; : \ and space.

DVS 510 Series • HTML Configuration and Control 85