Extron electronic DVS 510 SA manual IR 904 Image Adjustment Buttons

Detail buttons — Adjust the sharpness of the image.

FImage Adjustment buttons — Let you make adjustments to the appearance of the image on the screen, including color, tint, contrast, brightness, and sharpness (Detail). For each of these controls, there are two buttons: + to increase the image property and

– to decrease it. You can also freeze the image on the screen (the Freeze button has no equivalent on the front panel).

To adjust the image using the remote control buttons:

1.Aim the IR 904 remote control at the front panel IR sensor.

2.While watching the display, press repeatedly or press and hold the + or – button for the desired picture control until the desired appearance is achieved.

	-	IMAGE ADJUSTMENTS				+
		COLOR	+	-	TINT
6f	-			-		6a
		CONT	+		BRIGHT	+
6e	-		+			6b
		DETAIL				FREEZE

6c

6d

Figure 27. IR 904 Image Adjustment Buttons

ÄTint buttons — Change the appearance of the colors on the screen. Ã Bright buttons — Set the black level of the current input.

¨Freeze button — Freezes the image on the screen. To unfreeze the image, press this button again.

G

J Cont buttons — Increase or decrease the range of image light and dark values (contrast).

ØColor buttons — Adjust the color intensity (at the lowest level, all colors are shades of gray).

GAudio Mute button — Toggles audio output muting on and off.

HVideo Mute button — Toggles video output muting (hiding) on and off.

IAV Mute button — Mutes and unmutes both video and audio simultaneously.

DVS 510 Series • Operation 46