Honeywell MS-9200UDLS, MS-9200UDLSE 3=8 HOURS, 2=12 HOURS, Account Code, ACCOUNT CODE, 4 CHAR RANGE 0-F, Test Time Interval, Account Codes Screen, Test Time Interval Screen #1

Programming Master Programming Level

CENTRAL STATION 1=TEST TIME INT 2=ACCOUNT CODE 3=24HR TST TIME

Primary/Secondary Screen #1

Test Time Interval

Pressing 1 while viewing Primary/Secondary Screen #1 will cause the following screens to be displayed:

TEST TIME INTERVAL 1=24 HOURS2=12 HOURS3=8 HOURSTest Time Interval Screen #1TEST TIME INTERVAL 1=6 HOURS

Test Time Interval Screen #2

The test report sent to the Central Station phone number may be sent once every 6, 8, 12 or 24 hours. Select the desired Test Time Interval by pressing the corresponding digit in the screens shown above.

Account Code

Pressing 2 while viewing Primary/Secondary Screen #1 will cause the following screen to be displayed:

ACCOUNT CODE4 CHAR RANGE 0-FAccount Codes Screen

The Account Code, which is assigned by a Central Station, depends on the communication format being used. The Account Code screen will have a flashing cursor in the lower left corner. Enter the supplied account code using 0 - 9 and A- F keys.

104 MS-9200UDLS PN 52750:A 11/04/05