Circuits

Product Description

1.4 Circuits

Reference

Manual

SLC Communication Loop

One SLC loop is provided standard on the FACP main circuit board. The SLC loop, configurable for NFPA Style 4, 6 or 7, provides communication to addressable detectors, monitor (initiating device) and control (output device) modules. Refer to the SLC Wiring manual for information on wiring devices.

Output Circuits

The following output circuits are available on the FACP:

•Special Application Power

24 VDC Resettable (smoke detector power) output - 0.5 amps maximum 24 VDC Nonresettable or Resettable power output - 0.5 amps maximum

•24 VDC Battery Charger (up to 18 AH batteries)

NAC (Notification Appliance Circuits)

NACs configurable for four Style Y (Class B) or two Style Z (Class A) using NACKEY card in JP6, are provided with various programmable features.

Relays

One fixed and two fully programmable Form-C dry contact relays are provided. The fixed fail-safe relay monitors system trouble and the two programmable relays are factory default programmed for system alarm and system supervisory. Contacts are rated 2.0 amps @ 30 VDC (resistive) and 0.5 amps @ 30 VAC (resistive). The programmable relays can be programmed for the following operations:

•fire alarm

•trouble

•supervisory

•supervisory auto-resettable

•DACT communication failure

•process monitor

•process monitor auto-resettable

•hazard alert

•medical alert

•AC loss

1.5 Digital Alarm Communicator/Transmitter

Two modular phone jacks allow easy connection to telephone lines. Modular jacks are labeled PH1 for Primary Phone Line and PH2 for Secondary Phone Line. Two telephone line active red LEDs are provided as well as a green Kissoff LED. The integral digital communicator provides the following functions:

•Line Seizure: takes control of the phone lines disconnecting any premises phones

•Off/On Hook: performs on and off-hook status to the phone lines

•Listen for dial tone: 440 Hz tone typical in most networks

•Dialing the Central Station(s) number: default is Touch-Tone®, programmable to rotary

•For tone burst or touchtone type formats: discern proper Ack and Kissoff tone(s). The frequency and time duration of the tone(s) varies with the transmission format. The control panel will adjust accordingly.

•Communicate in the following formats:

12 Tone Burst types: 20 pps

(3+1, 4+1, 4+2, 3+1 Exp., 4+1 Exp., 4+2 Exp.)

3 Touchtone Types

4+1 Ademco Express

4+2 Ademco Express

Ademco Contact ID

MS-9200UDLS PN 52750:A 11/04/05

17