Honeywell MS-9200UDLS, MS-9200UDLSE MODULE#, MODULE#, IS ADDED, ADD MODULE, IS DELETED, EDIT MODULE, DELETE MODULE, Edit Module Screen, Add Module Screen #3, Delete Module Screen

Master Programming Level Programming

MODULES 1=ADD 2=DELETE 3=EDIT

Modules Screen

Pressing 1 for Control Module or 2 for Monitor Module will cause the following screen to be displayed:

ADD MODULE

MODULE# 005

IS ADDED

Add Module Screen #3

The programmer can continue adding modules by pressing the ESC or left arrow key which will return the display to the Add Module Screen #1.

3.6.2.2.2 Delete Module

Pressing 2 in the Modules Screen will display the Delete Module Screen which allows the programmer to delete a specific module:

DELETE MODULE ENTER MODULE#

***

Delete Module Screen

A flashing cursor will appear in the position of the first asterisk to the left. Using the panel keypad, key in the module address such as 005. When the last digit is keyed in, the following confirmation that the module has been deleted will be displayed:

DELETE MODULE

MODULE# 005

IS DELETED

3.6.2.2.3 Edit Module Screen for Monitor Module

The programmer can change a modules existing or factory default programming by pressing 3 in the Modules Screen. The following screen will be displayed:

EDIT MODULEENTER MODULE ADDRESS

***

Edit Module Screen

MS-9200UDLS PN 52750:A 11/04/05 59