Honeywell MS-9200UDLS, MS-9200UDLSE 1=ENABLED YES, 3.7.1 Disable Point, EDIT DETECTOR 1D001, Device Select Screen, Address Select Screen, Enable/Disable Select Screen

Maintenance Programming Level Programming

PROGRAMMING 1=POINT PROGRAM 2=HISTORY

3=PROGRAM CHECK

Maintenance Screen #1

3.7.1 Disable Point

Pressing 1 for Point Program, while viewing Maintenance Screen #1 will cause the following screens to be displayed:

POINT PROGRAM 1=DETECTOR 2=MODULEDevice Select Screen

Select the device type by pressing 1 for an addressable detector or 2 for an addressable module. The operator will be prompted to enter the three digit device address as shown in the following example for a detector:

EDIT DETECTOR ENTER POINT ADDRESS

***

Address Select Screen

A flashing cursor will appear in the bottom left corner of the display, prompting for the three digit device address. When the third digit is enter, 001 for example, a screen will appear which will allow enabling or disabling of the selected point, as illustrated in the following example:

EDIT DETECTOR 1D001

1=ENABLED YES

Enable/Disable Select Screen

Pressing 1 repeatedly will cause the display to toggle between Enabled Yes and Enabled No.

MS-9200UDLS PN 52750:A 11/04/05 121