Master Programming Level

Programming

When the type has been selected, the following screen will be displayed:

DETECTOR

1=ADD

2=DELETE

3=EDIT

Detector Screen

ADD DETECTOR

DETECTOR# 005IS ADDED

The programmer can continue adding detectors by pressing the ESC key which will return the display to the Add Detector Screen.

3.6.2.1.2 Delete Detector

Pressing 2 in the Detector Screen will display the Delete Detector Screen which allows the programmer to delete a specific detector:

DELETE DETECTOR

ENTER DETECTOR#

***

Delete Detector Screen

A flashing cursor will appear in the position of the first asterisk to the left. The programmer keys in the three digit detector address, such as 005. When the last digit is keyed-in, the following screen will be displayed:

DELETE DETECTOR

DETECTOR# 005

IS DELETED

The programmer can continue deleting detectors by pressing the ESC key which will return the display to the Delete Detector Screen.

3.6.2.1.3 Edit Detector

The programmer can change a detectors existing or factory default programming by pressing 3 in the Detector Screen. The following screen will be displayed:

EDIT DETECTOR ENTER POINT ADDRESS

***

Edit Detector Screen

A flashing cursor will appear in the position of the first asterisk to the left. The programmer keys in the three digit detector address, such as 017.

When the last digit is keyed-in, if the selected address has not been added to programming, a screen showing information about a device with the highest address that is installed will be displayed.

MS-9200UDLS PN 52750:A 11/04/05

49