Honeywell MS-9200UDLS, MS-9200UDLSE NAC, 1=NAC, 3=NAC, 2=NAC, 4=NAC, RELAY, 4.22.6 NAC, 4.22.7 Relays, 1=RELAY 1 2=RELAY 2 3=RELAY

Read Status

READ STATUS 1=RELAYS

2=PROGRAM CHECK 3=HISTORY

Read Status Screen #3

Operating Instructions

4.22.6 NAC

Pressing 3 while viewing Read Status Screen #2 will display the following screen:

		NAC
1=NAC	1	3=NAC 3
2=NAC	2	4=NAC 4

Note that 3=NAC 3 and 4=NAC 4 will always be displayed regardless of how the NACKEY NAC option card is installed.

The operator can press 1 to view the programmed options for NAC 1, 2 to view the programmed options for NAC 2, 3 to view the programmed options for NAC 3 or 4 to view the programmed options for NAC 4. The resulting screens will display the following information:

•Enable/Disable Status

•Circuit Type (Bell, Strobe, etc.)

•Silenceable/Nonsilenceable

•Auto Silence Enable/Disable and time delay (in minutes)

•Coding Selection (Temporal, Steady, etc.)

•Zone Assignments

•Silence Inhibit Enabled/Disabled

•Synchronization Type (System Sensor, Wheelock or Gentex)

4.22.7 Relays

Pressing 1 while viewing Read Status Screen #3 will display the following screen:

RELAY

1=RELAY 1 2=RELAY 2 3=RELAY 3

The operator can view the programmed option for each relay by pressing the corresponding number key.

MS-9200UDLS PN 52750:A 11/04/05 145