Programming

PROGRAMMING 1=PASSWORD CHANGE 2=CLEAR PROGRAM 3=PROGRAM CHECK

Programming Screen #4

Master Programming Level

3.6.10 Password Change

The factory set passwords, which have been programmed into the control panel, can be changed by selecting the Password Change option. Pressing 1 while viewing Programming Screen #4 will cause the following screen to be displayed:

PASSWORD CHANGE 1=MASTER

2=MAINTENANCE

Password Change Screen

Press 1 to change the Master Programming Level password or 2 to change the Maintenance Level password. Note that the passwords will not be displayed on LCD-80F annunciators.

The following screen will appear when either change option is selected:

ENTER NEW FIVE DIGIT

PASSWORD

Enter Password Screen

A flashing cursor will appear in the center of the display. Enter a new five digit password (such as 10101 for the Master Level). After the fifth digit is entered, the following screen will be displayed:

NEW

MASTER

PASSWORD IS

10101

PRESS

ENTER

IF OK

Password Change Screen

Pressing the Enter key will program the new password into the control panel and return the display to the Password Change Screen.

116

MS-9200UDLS PN 52750:A 11/04/05