
Master Programming Level | Programming |
3.6.5.3.2 | Date |
To change the date, press 2 while viewing the
TIME AND DATE
1=DAYLIGHT SAVINGS
Time & Date Screen #2
ENTER DATE
MONTH DAY YEAR 04-07-2002
Date Screen
A flashing cursor is located toward the top left of the display. Below the cursor is the current date. To change the date, enter the
3.6.5.3.3 Clock Format
The clock can be configured to display 12 hour (AM & PM) or 24 hour (military) time. Pressing 3 while viewing the
Note: If the clock is changed to 24 hour (military) format, the date will change to the European standard of
3.6.5.3.4 Daylight Savings Time
Pressing 1 while viewing
DAYLIGHT SAVINGS
1=ENABLED YES
2=START MONTH APR 3=START WEEK WEEK-1
Daylight Savings Screen #1
DAYLIGHT | SAVINGS | ||
1=END | MONTH | OCT | |
2=END | WEEK |
|
|
Daylight Savings Screen #2
Pressing 1 while viewing Daylight Savings Screen #1 will cause the display to toggle between Enabled Yes and Enabled No. The control panel will automatically update the time for daylight savings time when Enabled Yes is selected.
Pressing 2 while viewing Daylight Savings Screen #1 will display another screen which allows the programmer to select the month that daylight savings time will begin. In this
83 |