Programming

PROGRAMMING 1=WALKTEST 2=SYSTEM

3=ZONE SETUP

Maintenance Screen #2

Maintenance Programming Level

3.7.6 Zone Setup

Pressing 3 while viewing Maintenance Screen #2 will display the following screen:

ZONE SETUP 1=ENABLE 2=DISABLE 3=ZONE 97 98 99

Zone Setup Screen

Pressing 1 while viewing Zone Setup screen will display the following screen:

ZONE TO ENABLE

Z

Enable Screen

A flashing cursor appears to the right of the Z. To enable a zone, enter the two digit zone number (00 - 99). After the second digit is entered, the zone will be enabled and the cursor will return to the original position. The next zone to be enabled can then be entered. Press Esc (Escape) to return to the previous screen.

Pressing 2 while viewing Zone Setup screen will display the following screen:

ZONE TO DISABLE

Z

Disable Screen

A flashing cursor appears to the right of the Z. To disable a zone, enter the two digit zone number (00 - 99). After the second digit is entered, the zone will be disabled and the cursor will return to the original position. The next zone to be disabled can then be entered. Press Esc (Escape) to return to the previous screen.

126

MS-9200UDLS PN 52750:A 11/04/05