
Mounting and Wiring
Verify I/O module locations
The table below outlines the steps for identifying and recording the I/O module types in the controller.
Step
1
2
Action
Verify that the module types installed in the controller card slots are correct according to the controller model number. Refer to Table 6 to identify the module types.
Use to record the location, module type and signal type/range for each I/O module installed in the controller.
NOTE Module types should be installed in accordance with the limitations described in Table 7.
| Table 8 | I/O module identification record |
| ||
|
|
|
|
| |
|
|
| Signal Type/Range |
| |
Controller | I/O Module Type |
| (mV, V, mA, T/C, RTD, Ohms, pH)* | Terminal Block | |
Slot No. | (AI, AO, DI, DO, or PI/FI) |
| Color | ||
Al Ch 1 Al Ch 2 Al Ch 3 Al Ch 4 | |||||
|
|
|
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
* An Analog Input (AI) Module can be configured to accept multiple input types.
22 | UMC800 Controller Installation and User Guide | Release F |
|
| 4/01 |