Diagnostics and Troubleshooting Fault Detection and Troubleclearing
I/O Module
Diagnostics
(In The User Utility and
Operator Interface)
Menu | Status |
Item |
|
|
|
Controller | Fault Detection / Troubleclearing | ||
LED on CPU |
|
|
|
|
|
|
|
| Possible Cause | Controller Action | User Action |
|
|
|
|
MODULE BAD MODULE |
1through
MODULE
POWER LED flashes 11 times.
Analog input or analog output board does not have factory coefficients, or the I/O board is not a supported type.
1.If the error is an analog input board with no factory coefficients, default coefficients will be used for the
2.If the error is an analog output board with no factory coefficients, default coefficients will be used for the outputs.
3.If the board is an unsupported type, these block types do the following:
AI – sets its output to failsafe
DI – sets its output to OFF
Replace module.
88 | UMC800 Controller Installation and User Guide | Release F |
|
| 4/01 |
