Honeywell UMC800 manual Analog inputs module ID, Universal analog input module specifications

Mounting and Wiring

Signal Wiring

Analog inputs (module ID 1)

A universal Analog Input module accepts a variety of input signals from field devices as summarized in Table 9. Figure 13 illustrates the terminal block connections for the various inputs. See Specifications section for more details on all I/O module specifications. One AI module can be configured to accept multiple input types.

Table 9 Universal analog input module specifications

Specification

Description

Input Types

Number of Inputs

mV, V, mA, T/C, RTD, and Ohms

4 per module, up to 16 modules per controller (64 inputs)

Signal Source	Thermocouple with cold junction compensation, for operation between 32 °F to
	176 °F (0 °C to 80 °C)
	Line resistance up to 1000 ohms, T/C, mV, mA, V
	RTD Pt 100 3-wire connections, 40 ohms balanced max.
Input Impedance	10 Megohms for T/C, mV inputs,
	> 1 Megohms for volt inputs

Field Wiring

+12

-	11	Channel 4	Thermocouple Input		Current Input mA
RTD	10
			+		+
	1			4 to 20
					*
			T/C, mV, V	mA
+	9		-	Source	-
-	8	Channel 3
RTD	7		Ground Terminal	Ground Terminal
+	6			* A 250 ohm resistor is required for
				the input range.
-	5	Channel 2	mV, V Inputs
RTD	4			RTD Input (3 wires)
			+		+
			mV or V
+	3		Source		-
			-
-	2	Channel 1		RTD
RTD	1		Ground Terminal
				Ground Terminal

Figure 13 AI module terminal block connections

Release F	UMC800 Controller Installation and User Guide	25
4/01