Introduction
Purpose
Introduction
Purpose
This Installation and User guide assists in the installation, start up, operation, maintenance and troubleshooting of the UMC800 Controller.
The information in this guide is organized as follows:
Topic
UMC800 Overview
Equipment Identification
Considerations
Mounting and Wiring
Installation Checkout and Power Up
Operation
Maintenance
Diagnostics and
Troubleshooting
Parts List
Specifications
Supplemental Installation Information
Description
Provides a concise description of the UMC800 control system, its applications, architecture and its features
A
Lists a number of things to consider when planning the controller installation. Environmental factors as well as methods to minimize interference are discussed.
Information and procedures to successfully install the UMC800 controller and its components. Interconnecting wiring to other UMC800 components is also covered.
Provides a checklist to complete before power up. Covers power up procedure.
Power up and power down routines, operational modes and controls, software download routines, warm and cold start routines, Status LEDs, and scan rates are covered in this section.
Procedures are given covering routine maintenance and the replacement of controller components. Information on I/O module calibration is presented.
Provides description of controller status and error conditions. Provides corrective actions necessary to clear fault conditions.
A list of replacement parts for the controller.
Summary of electrical, physical, environmental and performance specifications.
Provides helpful information for installing digital equipment in severe electrical noise environments.
Refer to document
Page
3
5
11
15
44
52
63
79
91
93
Release F | UMC800 Controller Installation and User Guide | 1 |
4/01 |
|
|
