Honeywell UMC800 manual Analog outputs module ID, AO module terminal block connections

Mounting and Wiring

Signal Wiring

Analog outputs (module ID 2)

The Analog Output (AO) module provides four outputs at 0 mA to 20 mA (configurable for 4 mA to

20 mA or any span between 0 mA to 20 mA). When not used for an analog output, an output channel may be used to power a transmitter with 24 Vdc power. The controller will support up to 4 AO modules, for a total of 16 outputs. Figure 15 shows the terminal connections for the AO module. See Specifications section for details on all I/O module specifications.

12

11Channel 4

10

2
9
8	Channel 3
7
6
5	Channel 2
4
3
2	Channel 1
1

4 to 20 mA Output

Field Wiring	4 to 20 ma
+	Generator
Load
-

	Gnd
Ground Terminal

Field Wiring

	+
24 V	DC
	Power
	-
	Gnd

ATTENTION

Channels not used as analog outputs can be used to supply a transmitter with 24 Vdc power.

Figure 15 AO module terminal block connections

Release F	UMC800 Controller Installation and User Guide	27
4/01