HP Enterprise CC490A manual Memory Dimm, Remove the memory Dimm

Memory DIMM

Before proceeding, remove the following components:

●Formatter PCA. See Formatter PCA on page 78.

Remove the memory DIMM

CAUTION: ESD sensitive component.

NOTE: See Enable memory on page 82 after installing a new memory DIMM.

1.Place the formatter on a clean, flat, grounded surface, and then spread the latches apart on each side of the DIMM slot.

Figure 2-14Remove the memory DIMM (1 of 2)

ENWW Customer self repair (CSR) components 81