HP Enterprise CC490A manual Pickup assembly optional paper feeder

Pickup assembly (optional paper feeder)

Before proceeding, remove the following components:

●Paper feeder right front cover. See Right-front cover (optional paper feeder) on page 219.

●Paper feeder rear cover. See Rear cover (optional paper feeder) on page 218.

NOTE: The following procedure shows steps for removing the pickup assembly for Tray 3. 3 x 500- sheet optional paper feeder only: The steps for removing the pickup assemblies for Tray 4 and Tray 5 are the same unless noted. You must remove the pickup assemblies in sequence beginning with the pickup assembly for Tray 5.

Remove the pickup assembly (optional paper feeder)

1.Remove one screw (callout 1), and then remove the tray rail (callout 2). Figure 2-229Remove the pickup assembly (optional paper feeder) (1 of 5)

1

2

226 Chapter 2 Removal and replacement ENWW