HP Enterprise CC490A manual 121Reinstall the delivery assembly 2

Reinstall the delivery assembly

NOTE: For duplex models, the solenoid plunger must be removed from the discarded assembly, and then installed on the replacement assembly. For all models, the output-bin full sensor must be removed from the discarded assembly, and then installed on the replacement assembly.

1.Duplex models only: Make sure that the solenoid plunger is correctly installed on the replacement assembly.

Figure 2-120Reinstall the delivery assembly (1 of 4)

2.For all models: Do the following.

a.The output-bin full sensor is held in place on the delivery assembly by one tab and two hooks (callout 1).

Figure 2-121Reinstall the delivery assembly (2 of 4)

1

ENWW Internal assemblies 149