HP Enterprise CC490A manual Lifter-drive assembly optional paper feeder

Lifter-drive assembly (optional paper feeder)

Before proceeding, remove the following components:

●Rear cover (optional paper feeder). See Rear cover (optional paper feeder) on page 218.

Remove the lifter-drive assembly (optional paper feeder)

1.Disconnect one connector (callout 1), and then release the wire harnesses (callout 3) from the guides (callout 2).

Figure 2-236Remove the lifter-drive assembly (optional paper feeder) (1 of 2)

1

23

2.Remove two screws (callout 1), and then remove the sheet-metal plate (callout 2). Remove one spring (callout 3), and then remove the lifter drive assembly.

Figure 2-237Remove the lifter-drive assembly (optional paper feeder) (2 of 2)

1

2

3

230 Chapter 2 Removal and replacement ENWW