HP Enterprise CC490A manual Enable memory, Click Settings, Vista, Click the Device Settings tab

2.Lift the DIMM up at an angle, and pull it out.

Reinstallation tip Hold the DIMM by the edges. Align the notch on the DIMM with the bar in the DIMM slot at an angle and firmly press the DIMM into the slot until it is fully seated. When installed correctly, the metal contacts are not visible. Push down on the DIMM until both latches engage the DIMM.

Figure 2-15Remove the memory DIMM (2 of 2)

Enable memory

Windows XP, Windows Server 2003,	1.	Click Start.
Windows Server 2008, and Windows	2.	Click Settings.
Vista
	3.	Click Printers and Faxes (using the default Start menu view) or click
		Printers (using the Classic Start menu view).
	4.	Right-click the product driver icon, and then select Properties.
	5.	Click the Device Settings tab.
	6.	Expand the area for Installable Options.
	7.	Next to Automatic Configuration, select Update Now.
	8.	Click OK.

NOTE: If the memory is not updated correctly after using the Update Now option, you can manually select the total amount of memory installed in the product in the Installable Options area.

The Update Now option overwrites any existing product configuration settings.

82 Chapter 2 Removal and replacement ENWW