HP Enterprise CC490A manual Remove the main-drive assembly

Remove the main-drive assembly

1.Remove eight connectors (callout 1), and then release the wire harnesses from the guides (callout 2).

NOTE: Leave the wire harnesses with the product.

Figure 2-196Remove the main-drive assembly (1 of 6)

1

2

2.Remove two screws (callout 1), disconnect one connector (callout 2), and then remove the developing-disengagement motor.

NOTE: When the motor is reinstalled, make sure the motor PCA is positioned at the top of the assembly.

Figure 2-197Remove the main-drive assembly (2 of 6)

2

1

204 Chapter 2 Removal and replacement ENWW