HP Enterprise CC490A manual Low-voltage power supply Lvps, Remove the low-voltage power supply

Low-voltage power supply (LVPS)

Before proceeding, remove the following components:

●Formatter. See Formatter PCA on page 78.

●Upper-left cover. See Upper-left cover on page 96.

●Power-supply cover. See Power-supply cover on page 98.

●Left cover. See Left cover on page 99.

●Front-top cover. See Front-top cover on page 100.

●Rear-top cover. See Rear-top cover on page 102.

●Rear cover. See Rear cover on page 112.

●Interconnect board (ICB). See Interconnect board (ICB) on page 153.

NOTE: The formatter cage is attached to the LVPS. Remove both components as an assembly. You can then remove the formatter cage from the LVPS.

Remove the low-voltage power supply

CAUTION: ESD-sensitive part.

1.Remove four screws, and then slide the sheet-metal plate toward the back of the product to remove. Figure 2-130Remove the low-voltage power supply (1 of 6)

ENWW Internal assemblies 157