HP Enterprise CC490A manual Change jam recovery, Set the jam recovery feature

Change jam recovery

This product provides a jam recovery feature that reprints jammed pages. The following options are available:

●AUTO — The product attempts to reprint jammed pages when enough memory is available. This is the default setting.

●OFF — The product does not try to reprint jammed pages. Because no memory is used to store the most recent pages, performance is optimal.

NOTE: When using this option, if the product runs out of paper and the job is being printed on both sides, some pages can be lost.

●ON — The product always reprints jammed pages. Additional memory is allocated to store the last few pages printed. This might cause overall performance to suffer.

Set the jam recovery feature

1.Press the Home button .

2.Press the down arrow to highlight the CONFIGURE DEVICE menu, and then press the OK button.

3.Press the down arrow to highlight the SYSTEM SETUP menu, and then press the OK button.

4.Press the down arrow to highlight the JAM RECOVERY menu, and then press the OK button.

5.Press the down arrow or up arrow / to highlight the appropriate setting, and then press the OK button.

6.Press the Home button to return to the Ready state.

402 Chapter 3 Solve problems ENWW