HP Enterprise CC490A manual Print Quality menu

Print Quality menu

To display: Press the Home button , select the CONFIGURE DEVICE menu, and then select the PRINT QUALITY menu.

NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no default.

Item Sub-item Sub-item Values Description

ADJUST COLOR	HIGHLIGHTS
	●	CYAN DENSITY
	●	MAGENTA DENSITY
	●	YELLOW DENSITY
	●	BLACK DENSITY

Range from +5 to	Adjust the darkness or lightness of
–5. Default is 0.	highlights on a printed page. Lower values
	represent lighter highlights on a printed
	page, and higher values represent darker
	highlights on a printed page.

MIDTONES

●CYAN DENSITY

●MAGENTA DENSITY

●YELLOW DENSITY

●BLACK DENSITY

Range from +5 to	Adjust the darkness or lightness of
–5. Default is 0.	midtones on a printed page. Lower values
	represent lighter midtones on a printed
	page, and higher values represent darker
	midtones on a printed page.

SHADOWS

●CYAN DENSITY

●MAGENTA DENSITY

●YELLOW DENSITY

●BLACK DENSITY

Range from +5 to	Adjust the darkness or lightness of
–5. Default is 0.	shadows on a printed page. Lower values
	represent lighter shadows on a printed
	page, and higher values represent darker
	shadows on a printed page.

RESTORE COLOR	Restore the color settings by resetting the
VALUES	density values of each color.
SET	For each tray, setting the registration shifts
REGISTRATION	the margin alignment to center the image
	on the page from top to bottom and from
	left to right. You can also align the image
	on the front with the image printed on the
	back.
ADJUST TRAY <X>	Perform the alignment procedure for each
	tray.
	When it creates an image, the product
	scans across the page from side to side as
	the sheet feeds from top to bottom into the
	product.
PRINT TEST	Print a test page and instructions for
PAGE	setting the registration of the image
	location.

324 Chapter 3 Solve problems ENWW