HP Enterprise CC490A manual 89Remove the registration assembly 2

Remove the registration assembly

NOTE: If a replacement registration assembly is installed, you must use the control-panel menus to reset the registration-roller count and input the media sensor value. See Service menu on page 420 and Service menu on page 420.

1.Release one tab (callout 1), and then remove the cover (callout 2). Figure 2-88Remove the registration assembly (1 of 8)

1

2

NOTE: When reinstalling the cover, be sure that the tabs are seated correctly.

Figure 2-89Remove the registration assembly (2 of 8)

ENWW Internal assemblies 129