HP Enterprise CC490A manual Cyan Cartridge Very LOW, Data Received, DATE/TIME = YYYY/MMMM/DD Hhmm

Table 3-14Control-panel messages (continued)

Description Recommended action

CYAN CARTRIDGE VERY LOW	The product indicates when a supply level is
	very low. Actual print cartridge life might vary.
	Consider having a replacement print
	cartridge available to install when print quality
	is no longer acceptable. You do not need to
	replace the print cartridge at this time unless
	print quality is no longer acceptable. After an
	HP supply has reached the very low
	threshold, the HP premium protection
	warranty for that supply has ended.

If print quality is no longer acceptable, replace the print cartridge. See Print cartridges

on page 74.

CYAN CARTRIDGE VERY LOW To continue press OK

The product indicates when a supply level is very low. Actual print cartridge life might vary. Consider having a replacement print cartridge available to install when print quality is no longer acceptable. You do not need to replace the print cartridge at this time unless print quality is no longer acceptable. After an HP supply has reached the very low threshold, the HP premium protection warranty for that supply has ended.

Press the OK button to continue. If print quality is no longer acceptable, replace the print cartridge. See Print cartridges

on page 74.

DATA RECEIVED	The product is waiting for the command to	Press the OK button to print the last page.
To print last page press OK	print the last page.
DATE/TIME = YYYY/MMMM/DD HH:MM	The current date and time set for the product.	Press the OK button to set the date and time
To change press OK		or press the stop button to skip setup.
To skip press
Deleting private jobs	The product is deleting a private stored job.	No action is necessary.
Deleting...	The product is currently deleting the stored	No action is necessary.
	job.
EIO <X> DISK INITIALIZING	The specified EIO disk device is initializing.	No action is necessary.
EIO <X> DISK NOT FUNCTIONAL	The EIO disk in slot <X> is not working	1. Turn the product off.
	correctly.	2.	Remove the disk from the slot indicated.
		3.	Replace with a new disk.
		4.	Turn the product on.
EIO <X> DISK SPINNING UP	EIO disk device in slot <X> is spinning up its	No action is necessary.
	platter. Jobs that require disk access must
	wait.
EIO DEVICE FAILURE	The specified device has failed.	Press the OK button to clear.
To clear press OK
EIO FILE OPERATION FAILED	A PJL file system command attempted to	Press the OK button to clear.
To clear press OK	perform an illogical operation.
EIO FILE SYSTEM IS FULL	A PJL file system command could not store	Press the OK button to clear.
To clear press OK	something on the file system because the file
	system was full.

360 Chapter 3 Solve problems ENWW