HP Enterprise CC490A manual Enww

6.Slide the bottom of the assembly away from the product, tip the top of the assembly away from the product, and then remove the assembly.

Figure 2-135Remove the low-voltage power supply (5 of 6)

2

1

7.Place the assembly on a flat surface. Remove two screws (callout 1), and then separate the formatter cage (callout 2) from the low-voltage power supply (callout 3).

NOTE: If you are removing the power supply for internal product access, you can leave the formatter cage installed on the power supply chassis.

Figure 2-136Remove the low-voltage power supply (6 of 6)

2

1

3

160 Chapter 2 Removal and replacement ENWW