HP Enterprise CC490A manual Main-drive assembly

Main-drive assembly

NOTE: Removing the main-drive assembly typically requires more than 2 hours to complete.

Before proceeding, remove the following components:

●Formatter. See Formatter PCA on page 78.

●Intermediate transfer belt (ITB). See Intermediate transfer belt (ITB) on page 92.

●Upper-left cover. See Upper-left cover on page 96.

●Power-supply cover. See Power-supply cover on page 98.

●Left cover. See Left cover on page 99.

●Front-top cover. See Front-top cover on page 100.

●Rear-top cover. See Rear-top cover on page 102.

●Rear cover. See Rear cover on page 112.

●Interconnect board (ICB). See Interconnect board (ICB) on page 153.

●Low-voltage power supply. See Low-voltage power supply (LVPS) on page 157.

●DC controller PCA. See DC controller PCA and tray on page 161.

●High-voltage power supply lower. See High-voltage power supply lower (HVPS-D) on page 163.

●Exhaust fan and fan duct. See Exhaust fan and fan duct on page 169.

●High-voltage power supply upper. See High-voltage power supply upper (HVPS-T) on page 196.

●Yellow, magenta, cyan, and black drum motors. See Remove the yellow, magenta, cyan, and black drum motors on page 199.

ENWW Internal assemblies 203