HP Enterprise CC490A manual Menu, 13Embedded Jetdirect menu

I/O menu

Items on the I/O (input/output) menu affect the communication between the product and the computer. If the product contains an HP Jetdirect print server, you can configure basic networking parameters by using this submenu. You can also configure these and other parameters through HP Web Jetadmin or the embedded Web server.

For more information on these options, see the product user guide.

To display: Press the Home button , select the CONFIGURE DEVICE menu, and then select the I/

Omenu.

NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no default.

Item	Sub-item	Values	Description
I/O TIMEOUT		Range: 5 - 300	Allows you to set the product I/O
			TIMEOUT in seconds. The default
			is 15 seconds.
			Use this setting to adjust timeout
			for the best performance. If data
			from other ports appears in the
			middle of your print job, increase
			the timeout value.

EMBEDDED JETDIRECT MENU See the next table for a list of options.

Table 3-13Embedded Jetdirect menu

Item	Sub-item	Sub-item	Sub-item	Description
INFORMATION	PRINT SEC PAGE		YES*	YES: Prints a page that contains the current
			NO	security settings on the HP Jetdirect print
				server.
				NO: A security settings page is not printed.
	TCP/IP	ENABLE	ON*	ON: Enable the TCP/IP protocol.
			OFF	OFF: Disable the TCP/IP protocol.
	HOST NAME			An alphanumeric string, up to 32 characters,
				used to identify the product. This name is
				listed on the HP Jetdirect configuration page.
				The default host name is NPIxxxxxx, where
				xxxxxx is the last six digits of the LAN
				hardware (MAC) address.

334 Chapter 3 Solve problems ENWW