HP Enterprise CC490A manual Pickup motor, Remove the pickup motor

Pickup motor

Before proceeding, remove the following components:

●Formatter. See Formatter PCA on page 78.

●Upper-left cover. See Upper-left cover on page 96.

●Power-supply cover. See Power-supply cover on page 98.

●Left cover. See Left cover on page 99.

●Front-top cover. See Front-top cover on page 100.

●Rear-top cover. See Rear-top cover on page 102.

●Rear cover. See Rear cover on page 112.

●Right-rear cover. See Right-rear cover on page 110.

●Power-supply fan. See Power-supply fan on page 152

●Interconnect board (ICB). See Interconnect board (ICB) on page 153.

●Low-voltage power supply. See Low-voltage power supply (LVPS) on page 157.

Remove the pickup motor

Remove two screws (callout 1), disconnect one connector (callout 2), and then remove the motor (callout 3).

Figure 2-153Remove the pickup motor

2

1 3

172 Chapter 2 Removal and replacement ENWW