Qualifications and Assumptions
This guide assumes that you are familiar with your system and network layout. Installing the LAN card and adding the Silentwriter 1765 to your network will be easier if you
•have used your network operating system
•have the proper network software
•have a fully operational system
In addition, to complete installation and configuration on the network you must have access to the supervisor account, or have access to an account that has supervisor and print server operator privileges.
Where to Go Next
The rest of this document describes the tasks necessary to complete network installation of the Silentwriter
1765. You will need to complete the following steps:
1.Set up the Silentwriter 1765 or upgrade the Silentwriter 1760. See Chapter 2, “1765 Set Up.”
2.Install the NEC 1765 Administration software and NEC 1765 Client software. See Chapter 3, “Installing NEC 1765 Software.”
3.Connect the Silentwriter to your Network. See Chapter 4, “Configuring Your Network Printer.”
4.Use NEC 1765 Administration software to configure the network and printer. See Chapter 5, “NEC 1765 Administration Software.”
Once the Silentwriter has been connected to the network and configured properly, users can use NEC 1765 Client software to manage individual printing jobs. See Chapter 6, “NEC 1765 Client Software.”
