LAN Card Parameters Dialog Box
Open the LAN Card Parameters dialog box by selecting the LAN Card menu option on the Configure menu or by selecting the LAN Card button in the Printer Administration window.
The LAN Card Parameters dialog box includes the following information.
LAN Card Type: The LAN card’s hardware type.
MAC Address: The LAN card’s personal network address.
Printer Name: The printer can be renamed. You may use any combination of
Firmware Version: The LAN card’s firmware version.
Serial Number: The serial number of the Silentwriter LAN card.
Default Name: The name of the LAN card set at the factory. The default printer name is “NP_” followed by six digits. An example name is NP_901715.
Printer Polling Rate: Sets the frequency in tenths of a second with which the LAN card requests new status and configuration information from the printer. The range is 20 to 255 tenths of a second and the default is 50 tenths of a second. Setting printer access too frequently will affect the printer’s processing performance. Use the default setting unless unavoidable. Setting the value to 0 will prevent updating.
Busy Timeout: Sets the wait time in seconds before a timeout when the server fails to respond. The range is 15 to 255 seconds and the default is 15 seconds.
Saves changes and closes dialog box
Discards changes and closes dialog box
Opens online help about this dialog box
5 NEC 1765 Administration Software
NEC 1765 Administration Software for TCP/IP |
