NetWare Configuration Dialog Box
NEC 1765 Administration software allows you to configure the printer across networks. The NetWare Configuration dialog box allows you to configure a Silentwriter on a NetWare network from a TCP/IP- based network operating system.
The NetWare Configuration dialog box includes the following information.
MAC Address: Displays the LAN card’s network address.
Print Server Name: The print server name for the NetWare environment can be changed. You may use any combination of
File Server Connection
Limited File Server: NetWare network operating system software allows a single printer to connect to multiple file servers. You can connect your Silentwriter to up to 8 file servers. To limit the printer to only one file server, enter the name of the file server in the Limited File Server text box.
note: Specifying a file server may improve performance time as the NEC 1765 Administration software will no longer scan for file servers. You may want to specify a limited file server even in single server networks.
Scan for File Servers: Logs into the file server on a regular basis when this check box is selected.
Scan Interval: Sets the frequency in seconds with which the Silentwriter scans to the file server. The range is 1 to 255 minutes and the default is 5 minutes. If a limited file server has been specified or Scan for File Servers is turned off, the scan interval is automatically set to 0 minutes.
Saves changes and closes dialog box
Discards changes and closes dialog box
Opens online help about this dialog box
