3–4 1765 Network Printer Configuration Guide
Installing NEC 1765 Software for NetWarePrecautions
• Do not run NEC 1765 Administration software a nd
NEC 1765 Client software simultaneously on the
same computer.
• If the NEC 1765 software requires additional
memory to run, try closing unused software
applications to free more memory.
• Only the system administrator should install and
use NEC 1765 Administration software. Network
users can use NEC 1765 Client software to manage
print jobs across the network.
• Install NEC 1765 Client software on each client
computer. See “Installing NEC 1765 Client Software
for NetWare in Windows 3.1x” and “Installing
NEC 1765 Client Software fo r NetWare in Windows
95” on page 3-8.
To install NEC1765 software on Windows systems you
need
• a computer with an 80386 SX processor operating at
16 mhz or above
• for Windows 3.1x, at least 8 megabytes of RAM and
preferably more
• for Windows 95, at least 8megabytes of RAM and
preferably more
• a hard disk with at least 2 megabytes available
note: Both NEC 1765 Administration software and
NEC 1765 Client software are easier to use with a
mouse. NEC 1765 software also supports hot key
combinations. Underlined letters indicate a hot key.
Press Alt and the underlined letter to use a hot key
combination. Press Tab to move from field to field.
Press the Up and Down arrows to scroll.