NEC 1765 Client Software for NetWare
The NEC 1765 Client software for NetWare allows you to monitor the printer status, check the printer configuration, and monitor current print jobs. The following section describes specific tasks and the steps to complete them. For detailed information about windows, dialog boxes, and menu options in NEC 1765 Client software see page
note: NEC 1765 Client software for NetWare uses a NetWare active connection. If the current number of NetWare active connections is equal to the number specified in the maximum user license, you will not be able to see any printers in the NEC 1765 Client software until another user logs out to reduce the number of NetWare active connections. For best performance, limit active connections to at least one less than the number specified in the maximum user license.
note: Windows 3.1x users may encounter difficulties with Windows resources while using NEC 1765 Client software for NetWare. If your Windows 3.1x system crashes frequently, try editing your WIN.INI file. To verify that the problem is caused by Windows resources, modify the WIN.INI file so that both load and run commands are empty as shown below. Comment out the original load and run commands by typing a “;” in front of them.
load=
;load=nwpopup.exe stbvisn.exe run= ;run=c:\SWRITER\wspd.exe
Then restart Windows. If that helps, experiment with adding one load or run command at a time. You must restart Windows each time the WIN.INI file is edited for changes to take effect. If the problem persists, consider upgrading to Windows 95.
