NEC 1765, 1700 Series manual Connecting Twisted Pair Cable Connecting LocalTalk cable

Connecting Twisted Pair Cable

Unshielded twisted pair (UTP) cable connects to the middle connector of the LAN card panel.

1.Connect one end of the twisted pair cable to the middle connector on the LAN card panel.

2.Connect the other end of the twisted pair cable to a UTP wall outlet or other Ethernet source.

Connecting Twisted Pair Cable

Connecting LocalTalk cable

LocalTalk cable connects to the top connector of the LAN card panel. You can connect LocalTalk cable directly to your Macintosh or to a LocalTalk network. Follow these steps to connect your Silentwriter to a LocalTalk network using RJ-11 cable.

1.Connect LocalTalk cable and converter box to the top connector of the LAN card panel.

2.If the Silentwriter is at the end of a LocalTalk network, connect RJ-11 cable to one RJ-11 connection in the converter box. If necessary, connect a 120-ohm terminator in the other RJ-11 connection in the converter box (A).

3.If the Silentwriter is in the middle of a LocalTalk network, move one cable from a workstation to one RJ-11 connection in the converter box. Connect a new RJ-11 cable from the Silentwriter to the workstation (B).

Connecting LocalTalk Cable

2–10 1765 Network Printer Configuration Guide