NEC 1765 Administration Software for NetWare
The NEC 1765 Administration software for NetWare allows you to display and modify configuration information for the NEC Silentwriter 1765. The next section describes specific tasks and the steps to complete them. For information about specific windows, dialog boxes, and menu options see page
note: Windows 3.1x users may encounter difficulties with Windows resources while using NEC 1765 Administration software for NetWare. If your Windows 3.1x system crashes frequently, try editing your WIN.INI file. To verify that the problem is caused by Windows resources, modify the WIN.INI file so that both load and run commands are empty as shown below. Comment out the original load and run commands by typing a “;” in front of them.
load=
;load=nwpopup.exe stbvisn.exe run= ;run=c:\SWRITER\wspd.exe
Then restart Windows. If that helps, experiment with adding one load or run command at a time. You must restart Windows each time the WIN.INI file is edited for changes to take effect. If the problem persists, consider upgrading to Windows 95.
Using NEC 1765 Administration Software for NetWare
This section describes the steps to perform specific network and printer configuration tasks with NEC 1765 Administration software for NetWare. Detailed information about NEC 1765 Administration software windows, dialog boxes, and menus begins on “NEC 1765 Printer Administration Window” on page
Displaying Available Printers
You can display a list of available printers on the network and sort and filter the list.
1.Open the NEC 1765 Administration software.
2.The NEC 1765 Printer Administration window displays a list of all printers on the network that are configured to work with NEC 1765 software.
You can sort the list by printer name, MAC address, or network number.
1.Select the Sort menu from the Printer Administration window menu bar.
2.Select the sort key from the menu.
You can also filter the list by network number.
1.Select the Filter menu from the Printer Administration window menu bar.
2.In the Network Number dialog box select the network number of the printers you wish to display.
3.Click the OK button.
5 NEC 1765 Administration Software
NEC 1765 Administration Software for NetWare |
